Danfoss energy regulators KVC12 034L0143 4 mm Weld 1/2"

Product Description

Danfoss capacity regulators are used to adapt compressor capacity to actual evaporator load by supplying a replacement capacity in the form of hot/cool gas.

They are installed in a bypass line between the high and low-pressure sides of the refrigeration system and are designed for direct gas injection into the suction line. 693723 imposes a lower limit on the compressor suction pressue by supplying the low pressure side with replacement capacity in the form of hot gas/cool gas from the high pressure side.

Product Features

Regulating range 0.2 - 6.0 bar, factory setting 2 bar, max. working pressure 28 bar.

KVC type energy regulator is for regulating capacity of the compressor, to adapt to the evaporator load.

KVC type energy regulator is mounted on the refrigeration system of high / low pressure side of the road between the bypass pipe.

KVC helps to send the heat from high pressure side into the lower pressure side through the bypass line, to replace part of the load, so that the compressor suction pressure is not less than the minimum limit.