Features & Benefits

Oil Equalization Port and Sight Glass

Specifications

Item: Compressor

Used On Item: Medium/High Temperature Air Conditioner

Nominal Capacity 22000 BTU/Hour; 

Refrigerant Type R-134A/R-404A/R-407A/C/F/R-507A; 

Voltage Rating 380 to 400 Volt AC 50 Hertz, 460 Volt AC 60 Hertz 3-Phase; 

2.33 Cubic Inch per Revolution; Includes Polyol Ester Oil

Durable Maneurop, with over 40 years of professional experience, the Maneurop range of piston compressors (1.5-13 hp single unit) is suitable for commercial refrigeration applications.

The Maneurop MT, MTZ, NTZ compressors are suitable for a wide range of low and medium temperature applications such as cold rooms, milk tanks, mushroom banks, ice machines, cold dryers, etc.

The compressors are available with a wide range of HFC refrigerants. The compressors are available with a wide range of HFC refrigerants, such as R404A, R134a, R407C/R407A/R407F, etc.

Maneurop piston compressors are specially designed for a wide range of applications and have a wide operating range. All components are of high quality and precision machined in order to guarantee a long service life.

The Maneurop MT and MTZ series are hermetic piston compressors designed for medium and high temperature applications.

The internal protection of the compressor, the high efficiency of the annular valve discs and the high torque motor combine to produce a high quality product.

MT and MTZ compressors share the same mechanical construction and motor design.

The MT compressors are filled with mineral oil and the MTZ compressors with ester oil.

The entire range of compressors can be used with a variety of refrigerants depending on the compatibility of the oil and the refrigerant.

MTZ compressors can be installed not only in new systems, but also as replacements for Maneurop/Meurop(R) MTE compressors in older systems.

The MT and MTZ compressors have a large internal volume, which helps the compressor to be more resistant to liquid strikes when the system is returned to liquid.

MT and MTZ compressors are fully suction-cooled compressors. This means that the compressor does not require any additional cooling at all. This makes it possible to install a silencer in the compressor housing to obtain a low operating noise level without the risk of overheating of the compressor.

MT and MTZ compressors are available in a total of 16 different models with discharge capacities ranging from 30 to 271 cm3/rev. A total of 7 electric motors, including single-phase and three-phase, 50 Hz to 60 Hz, are available. All compressors are available in VE version (oil balance port + oil sight glass).